

Searching in stories... |
TimelineShow all
|
Options
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Show the latest entries |
||
Searching in stories... |
TimelineShow all
|
The DFW C.V was a German two-seat reconnaissance biplane of the First World War, designed by the Deutsche Flugzeug-Werke (DFW) of Leipzig. It belonged to a family of closely related aircraft, the DFW C.IV, C.V, C.VI and F37, which first appeared in 1916. These were conventionally configured biplanes with unequal-span, unstaggered wings and two open cockpits in tandem, the observer sitting behind the pilot and defending the aircraft with a machine gun on a ring mount. Compared with earlier DFW designs, the fuselage was much more carefully streamlined and, combined with more powerful engines, this gave the C.V an excellent performance. With about 3,250 examples built, it was produced in larger numbers than any other German aircraft of the war.
The first member of the family, the C.IV, had a single-bay wing cellule and was powered by a 150 hp (112 kW) Benz Bz.III. It was soon replaced on the production lines by the definitive C.V, which had a two-bay wing cellule and was powered either by a 185 hp (138 kW) C.III N.A.G. (a licence-built Conrad C.III) or by a 200 hp (149 kW) Benz Bz.IV. As might be expected, the more powerful Benz engine gave noticeably better performance. Later aircraft received the Bz.IVa, a version with a raised compression ratio that allowed the C.V to operate at about 5,000 m, an altitude that many fighters of the time could hardly reach.
The C.V's chief designer was Heinrich Oelerich (the Polish Aviation Museum also credits the engineer Karl Sabersky-Müssigbrodt). About 2,000 aircraft were built by DFW itself and some 1,250 more under licence by Aviatik (initially as the Aviatik C.VI, then as the DFW C.V(Av) when the Idflieg rationalised its designations), Halberstadt, LVG and Schütte-Lanz. LVG later incorporated many features of the design into its own LVG C.V and LVG C.VI.
A further development was the C.VI, a sturdier aircraft with balanced ailerons. Only a single example was built, but it was followed in the closing stages of the war by three aircraft designated F37, which may have received the official designation DFW C.VII, although this is not certain. After the war an F37 fitted with a 300 hp (220 kW) BMW IV engine broke the world altitude record in 1919, reaching 7,700 m. However, since this flight breached the terms of the Armistice, it was not recognised by the FAI. The aircraft then had its Benz engine reinstalled and was converted into a passenger "limousine", with a richly upholstered cabin enclosed by a canopy. Redesignated DFW P1 Limousine, it could carry three passengers and was demonstrated by DFW, flying passengers, at the ELTA aviation exhibition held in Amsterdam in 1919.
The C.V was a biplane of mixed, mostly wooden construction. The fuselage had a wooden framework covered with plywood, the front section being skinned with aluminium sheet; the Polish Aviation Museum notes that its sides and bottom were built up from layers of glued veneer strips, which saved scarce plywood. The tail surfaces had a framework of welded steel tubes covered with canvas, with horn-balanced control surfaces and braced stabilisers. The wings were rectangular, of two-spar wooden construction and covered with canvas. They were joined by streamlined steel-tube struts forming a two-bay cellule, the slightly longer upper wing alone carrying ailerons. The conventional landing gear was fixed, with a straight common axle sprung by rubber cords and a tail skid.
The six-cylinder inline engine was fitted with a long, vertical, chimney-like exhaust pipe (aircraft built by LVG had a horizontal exhaust) and was covered by an aerodynamic cowling, which was often left off in service. It drove a two-blade wooden propeller 2.8 m in diameter. Cooling was first provided by radiators on each side of the fuselage, while later aircraft used a radiator in the leading edge of the upper wing. The pilot had a fixed, synchronised Spandau machine gun firing through the propeller, and the observer a Parabellum machine gun on a ring mount; up to 100 kg of bombs could also be carried.
The C.V and its related designs were used as multi-role combat aircraft, for reconnaissance, artillery observation, photographic missions, liaison and light bombing. They served on the Western Front, in Italy, in Macedonia, in Palestine and on the Eastern Front, with Germany and with its ally Bulgaria, which received six aircraft in 1917. Stable and solidly built, the C.V was considered an excellent machine by its crews: in the hands of a skilled pilot it could outmanoeuvre most Allied fighters of the period. It remained in front-line service until early 1918, but 600 were still in use at the Armistice of 11 November 1918. Most were then scrapped under the terms of the Treaty of Versailles in 1919.
Some were used as trainers after the war, and eight aircraft were overhauled and converted for civil use by the airline Deutsche Luft-Reederei, a forerunner of Deutsche Luft Hansa.
Poland
The newly reborn Polish Air Force was the largest post-war user of the type. According to the sources, between 34 and 63 aircraft were used: 11 were seized in 1919, others were captured in Greater Poland and at the front, 13 were assembled in 1920 from seized parts and 28 were bought in Germany. Built by DFW, Aviatik, LVG and Halberstadt, they equipped several reconnaissance squadrons (Eskadra Wywiadowcza) and flew combat missions in 1919 on the Greater Poland, Southern and Lithuanian-Belarusian fronts. During the Polish-Soviet War of 1920 they took part in the spring offensive in Ukraine, the Battle of Warsaw and the Battle of the Niemen. Polish airmen appreciated their handling and robustness, although the high-compression engines caused problems. After the war the C.Vs served with squadrons 8, 12 and 16, and in the summer of 1921 three of them were assigned to an aerial survey platoon working for the mixed Polish-Soviet border commission. They were also used by the flying schools in Poznań-Ławica and Grudziądz and by the observers' school in Toruń, until 1923; the last examples were retired in 1924.
Other post-war users
Two C.Vs were used in Finland, four in the Netherlands (aircraft interned during the war), two in Switzerland, five (plus one assembled from spare parts) in Lithuania and four in Estonia. In 1925 the Bulgarian state aircraft workshops (Darzhavna Aeroplanna Rabotilnitsa) built seven copies as the DAR Uzunov-1 (DAR U-1), which were used as trainers by Bulgaria's secret air force, at a time when the Treaty of Neuilly prohibited military aviation in the country.
Post-war operators:
The only surviving DFW C.V is the fuselage of the C.V(Av) 17077/17, built by Aviatik in 1917 and displayed at the Polish Aviation Museum (Muzeum Lotnictwa Polskiego) in Kraków. Formerly part of the Berlin aviation museum collection, the damaged and incomplete aircraft, without its wings, was found after the Second World War near Czarnków, stored at the regional aviation depot in Gądki near Poznań, then in Pilawa and Wrocław, before being transferred to Kraków in 1963. It was restored there in 1998 and 1999, recreating its original layered construction and its appearance after its last wartime overhaul.
— — — = = — — —
— — — = = — — —
|
|
You choosed to show only the famous things! (Via the Options menu)
The comments below concern only this page (C.V).
For a general question or remark about aircraftube, please use the general blog.