

Searching in stories... |
TimelineShow all
|
Options
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Show the latest entries |
||
Searching in stories... |
TimelineShow all
|
Celestino Rosatelli (Belmonte in Sabina, 8 April 1885 - Turin, 23 September 1945) was an Italian aeronautical engineer. Head of the Fiat Aviazione design office from 1918 until the late 1930s, he designed more than fifty aircraft, around forty of which were built. His initial "R" appears in the designation of his aircraft: BR for Bombardiere Rosatelli (Rosatelli bomber) and CR for Caccia Rosatelli (Rosatelli fighter). His best-known designs include the Fiat CR.1, CR.20, CR.32 and CR.42 Falco biplane fighters, and the BR.20 Cicogna bomber.
Celestino Rosatelli was born in Belmonte in Sabina, a small village near Rieti in Lazio, to Bernardino Rosatelli and Apollonia Santini. His parents noticed his remarkable aptitude for mathematics and managed to support his studies. After attending the Industrial School of Rome, he went on to the Royal School of Engineering in Rome, where he graduated in civil engineering with top marks on 31 October 1910.
In 1915 Rosatelli was called up as a second lieutenant and posted to the Military Aviation Technical Directorate (DTAM) in Turin. There he worked with engineers Umberto Savoia and Rodolfo Verduzio and took part in the design of the Ansaldo S.V.A., a fast reconnaissance biplane whose prototype flew in March 1917.
His reputation soon spread beyond the DTAM. In 1918 Senator Giovanni Agnelli, founder of Fiat, obtained from the General Staff his transfer to the design office of the group's aviation branch, which he quickly came to lead.
Rosatelli's first design at Fiat was the BR of 1918, an advanced two-seat bomber biplane powered by the 700 hp Fiat A.14 engine. On 21 May 1919 test pilot Francesco Brack-Papa used it to set an altitude record of 7,250 m (23,500 ft) and a speed record of about 270 km-h. Derived from the BR, the Fiat ARF (Aeroplano Rosatelli Fiat) had increased fuel capacity and was presented in 1919 as a candidate for a transatlantic flight. It was followed by the BR.1, BR.2, BR.3 and BR.4, of which more than 250 were built, used by the Regia Aeronautica as well as Sweden and China.
Rosatelli also thoroughly reworked the SIA 7 and SIA 9 reconnaissance aircraft, correcting their flaws to produce the Fiat R.2 (1919), of which 129 were built. He also designed the R.700, a racing aircraft intended for an attempt on the world airspeed record.
For the 1922 fighter competition, Rosatelli designed the Fiat CR, whose two prototypes flew in 1923. Built of wood and fabric, this sesquiplane was unusual in having a lower wing longer than the upper one. Ordered in a batch of 240 as the CR.1, it equipped the 1st Fighter Group of the newly formed Regia Aeronautica from 1924 and was also exported to Latvia. The CR.2, CR.5 and CR.10 were variants fitted with different engines, mostly on an experimental basis.
The CR.20 of 1926 was a major step forward, its metal structure replacing the fabric-covered wooden frame. More than 700 were built (including the CR.20 Idro floatplane, CR.20bis and CR.20 Asso versions), and it made the name of the military aerobatic teams of Campoformido, near Udine, led by Rino Corso Fougier, forerunners of the Frecce Tricolori.
In the early 1930s Rosatelli designed the CR.30, followed by the CR.32, which first flew in April 1933. Compact, sturdy and highly manoeuvrable, it was built in some 1,050 examples and became one of the finest biplane fighters of its time. It distinguished itself in the Spanish Civil War, where at least 380 saw combat, and Spain built about a hundred more under licence as the "Chirri". It was also flown by Hungary, Austria and China. The CR.33, CR.40 and CR.41 remained prototypes.
Rosatelli's last major fighter was the CR.42 Falco, derived from the CR.32 and developed in 1938-1939. Although the biplane formula already seemed outdated, around 1,800 were built, making it the last single-seat biplane fighter manufactured by any of the Second World War combatants. It fought over Britain during the Battle of Britain, over Malta, Greece and North Africa, and also flew in Belgian, Hungarian and Swedish markings.
Rosatelli did not confine himself to biplanes. In 1935 he designed the APR.2 (Aero Postale Rosatelli) twin-engine airliner, powered by two Fiat A.59R engines. With room for twelve passengers, it was believed, when introduced on the Milan-Turin-Paris route, to be the fastest airliner in regular service in the world. Only one was built, but it served as the starting point for the BR.20 Cicogna bomber, which first flew on 10 February 1936. The first all-metal bomber of the Regia Aeronautica, the BR.20 was also bought by Japan.
He also designed the CR.25, a twin-engine escort and reconnaissance fighter of 1937 built in small numbers, and studied the CR.44, a twin-engine heavy fighter project that was never built. From 1931 onwards, the Fiat design office was also shaped by the arrival of Giuseppe Gabrielli, designer of the G.50 and G.55 monoplane fighters.
Rosatelli also took part in Turin's aviation life, joining the Board of Directors of the Aero Club Torino in 1927. He died in Turin on 23 September 1945.
The "Celestino Rosatelli" Higher Education Institute (IIS) in Rieti bears his name. In December 2013, its students launched the construction of a flying replica of the CR.1, built from the original drawings and powered by a period Hispano-Suiza engine, as part of a student-run aircraft company named ARCA (Azienda Reatina Costruzioni Aeronautiche). No original CR.1 has survived.
In October 2019 his home village of Belmonte in Sabina dedicated a monument to him, created by the artist Roberto Melchiorri. An original CR.1 wing and the full-scale reconstruction by the Rieti students were on display at the unveiling.
— — — = = — — —
|
|
You choosed to show only the famous things! (Via the Options menu)
The comments below concern only this page (Rosatelli Celestino).
For a general question or remark about aircraftube, please use the general blog.